Tricking skill testers and other machines into giving free credits


Using a piezoelectric "shocker", it is possible to trick certain coin receptors into "thinking" you have inserted a coin, when all you've really done is create a voltage spike in the electronics that was misinterpreted as the signal for "this guy has inserted a real, valid, authentic coin".

I have tried this with some success on coin slot modern machines, including vending machines, children's rides, parking gates, arcade games, and skilltesters. Here's a demonstration on a skilltester (crane game):



Skilltesters have preset payout rates, so really there's no skill involved. The claw's strength is set randomly, and in this demonstration the machine had a 2% payout rate, meaning that 1 in 50 games would be capable of lifting up the prize and dropping it in the chute.


How does this work? Can I do it?!

Yes, and it's pretty simple. If you're like me, you probably already know of these zappers by pulling apart electric lighters to see how they work! ...after which you proceeded to torment all your friends with it by zapping any piece of metal that they happen to touch.

This "zapper" is a piezoelectric igniter, it works by striking a piezoelectric material (such as quartz) with a springloaded hammer which generates a high-voltage potential difference between the terminals you can see in this picture:

For the purposes of this article, the black wire is terminal 1 and the brass endcap is terminal 2.
The black "stick" protruding from the other end is the striker.
When the striker is pressed, it will compress a spring-loaded hammer which will then release and strike the piezoelectric material generating a potential difference spike between the terminals causing a high voltage spark to jump up to a centimetre between the terminals and ignite a any flammable gas that happens to be there.

Implementation

So in the video above, you can see that I just modified the lighter by taking out the gas internals leaving the zapper in there with its trigger. What you probably didn't notice, is the grounding wire I've incorporated into the handle. This wire leads from terminal two to the handle where it's exposed simply so that when hold the device, the wire is touching me, grounding terminal two. You need to do this, otherwise no potential difference will be created between terminal one and the thing you're zapping (the zappee), and no spark will occur. By the way, the terminals are interchangeable -- it doesn't matter which one you use for what.

So in summary, you need to touch one terminal to ground it, and zap the machine with the other terminal.

Action

So once you have your zapper, you need to find something to zap. Remember, it makes a difference where you zap, and while you're aiming your jolt of electricity at the coin circuit, that jolt of electricity can take a roundabout route to said circuit. I found a vending machine where I had to zap a screw on the other side of the machine to get a dollar, and when I zapped closer to the coin slot the machine just reset.

Warning! Please note:

While it's highly unlikely and I have not encountered any situations where this has permanently damaged a machine, it is possible. Also, please note that cheating these machines and/or even just zapping them intentionally is probably illegal, so be aware of the legalities before doing anything.

14 comments:

  1. Will it still work if I just took the zapper out. Because i tried it today but nothing happened, or do i need to modify it like you did?

    ReplyDelete
    Replies
    1. You need to be touching one of the contacts on the zapper, and the spark will come from the other contact when you click it.

      Delete
    2. I tried it again at a different place and two machines just like resetted itself maybe i need to find older machines but i really want this to work at least once time. I'm so tired of those machines ripping me off and stealing my money. payback lol

      Delete
  2. Can I use a cheap zapper to do this?(My zapper make in china.)

    ReplyDelete
    Replies
    1. Any old zapper should be fine. The challenge is finding machines to use them on :)

      Delete
  3. Can you make a very simple how-to guide on how to actually build the zapper, including materials?
    Thanks :3

    ReplyDelete
  4. Hai!

    Nette Idee :-)
    Hast du zufällig Referenzwerte, was Spannung/Stromstärke angeht, also wie stark der Impuls sein muss, damit es funktioniert? Mich stört das Klicken des Feuerzeugs ein wenig... sowas könnte man sicher recht einfach mit Batterien und einem leisen Druckknopf konstruieren ;)

    ReplyDelete
    Replies
    1. Hallo :) Tut mir leid, mein Deutsch ist nicht so gut.. Ich habe nicht in der Lage, die Spannung / Strom testen. Es ist schwer zu testen, weil es so kurz ist und die Spannung so hoch ist (ca. 10 kV). Es waere ziemlich einfach einen batteriebetriebenen "Zapper" zu machen, koennte es sogar mit der Blitz-arbeiten aus einer Einwegkamera.

      Delete
  5. i tried it it didnt work grrrrrrrrrr i spent 1 week macking it waste of time

    ReplyDelete
  6. i want one i dont have any money and im afraid if i get one it wont work

    ReplyDelete
    Replies
    1. Just get a lighter. It will work on SOME machines.

      Delete
    2. This comment has been removed by the author.

      Delete
  7. Can you make a YouTube video tutorial on how to do it please?
    Would really help us all out!

    ReplyDelete
  8. Please make a tutorial video how to make it , thx !

    ReplyDelete